LoRa Sensor Reset Options
- JRB004 or JRB005
- These sensors contain an accelerometer, which allows you to shake them to reset.
- DLHT65 & DLHT65N || Dragino Sensors
- There is a blue button labeled "ACT"; press and hold for 5 seconds.
- If it's neither of the above sensors, possibly JRB301.
- Have the customer remove the battery for approximately 20 seconds.
Sensor not configured for Jolt Error
If the customer gets this error when connecting the sensor, have them do the following.
- Place the sensor right next to the hub and try connecting again.
- If this does not work, escalate to Level 2 Support.
- There is also a chance that the sensor was not purchased from Jolt.
Note:
When sensors are connected and placed in their refrigerators, it should take about 24 hours for the readings to even out.